. : /!\ VERY IMPORTANT /!\: .
DO NOT USE HAM SETTINGS - ON ANY CRICUMSTANCES / DO NOT USE RANGE TEST MODE - ON ANY CRICUMSTANCES
Longname Format: YourRadioName-CL-868 (if client/client_mute mode)
Longname Format: YourRadioName-GW-868 (if router/router mode)
RF Settings
Region: EU_868
Preset: LongFast
OK to mqtt: ON
Ignore MQTT: OFF
Max Hops: 4
Device
Node Info Broadcast Interval (for client/client_mute mode): 14400 seconds (Android) / 4 hours (iOS)
Node Info Broadcast Interval (for gateway/router mode): 43200 seconds (Android) / 12 hours (iOS)
Position
Update Interval (for client/client_mute mode): 120 seconds (Android) / 2 minutes (iOS)
Update Interval (for gateway/router mode): 43200 seconds (Android) / 12 hours (iOS)
Smart Position: ON
Minimum Interval (for client/client_mute): 900 seconds (Android) / 15 minutes (iOS)
Minimum Interval (for gateway/router mode): 21600 seconds (Android) / 6 hours (iOS)
Minimum Distance: 120 meters
Update Interval : 600 seconds (Android) / 10 minutes (iOS)
Default Channel Configuration
Channel: Longfast
Key: AQ==
Channel Settings - Uplink & Downlink: ON
MQTT Configuration
Address: mqtt.meshtastic.pt
Username: meshdev
Password: large4cats
Encryption enabled: OFF
TLS enabled: OFF
Topic: msh
OK to MQTT: ON
Ignore MQTT: OFF
Map reporting interval (for client/client_mute mode): 1800 seconds (Android) / 30 minutes (iOS)
Map reporting interval (for gateway/router mode): 21600 seconds (Android) / 6 hours (iOS)
ADDITIONAL SETTINGS
SOS CHANNEL (S.O.S COMS ONLY!) - Channel Name is case sensitive
Channel Name: SOS
Role: Secondary
Key: (no key - Empty)
Channel Settings - Uplink & Downlink: ON
Iberia CHANNEL (Channel bridging Portuguese and Spanish Meshtastic Communities) - Channel Name is case sensitive
Channel Name: Iberia
Role: Secondary
Key: (no key - Empty)
Channel Settings - Uplink & Downlink: ON
/!\ FOR IOT DEVICES AND TESTING ONLY !
433 Mhz Frequency Slot: 4
868 Mhz Frequency Slot: 1
Preset: Long_MODERATE
OK to mqtt: ON
Ignore MQTT: OFF
Max Hops: 4
Default Channel Configuration - Channel Name is case sensitive
Channel: LongMod
Key: AQ==
Channel Settings - Uplink & Downlink: ON
(For your IOT sensors and data, you should create a secondary channel with one key to maintain your data private)
QR-CODE Quick Config
After the scan and channel configurations - please check the Uplink & Downlink Settings if they are ON